The present document can't read!
Please download to view
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
...

LABDCT 2002 (Guide) Nexus.5020.Lab.guide

by kds20850

on

Report

Category:

Documents

Download: 0

Comment: 0

113

views

Comments

Description

Download LABDCT 2002 (Guide) Nexus.5020.Lab.guide

Transcript

Nexus 5020 Lab Guide Overview This lab guide describes the lab activities that are included in the course, “Implementing and Configuring Nexus 5000 Switches.” This lab guide describes each activity and provides step- by-step instructions for completing each exercise. Lab List This guide includes these activities: Lab 1: Analyzing FCoE Packet Traces Lab 2: Configuring the FCoE and Switch Mode Lab 3: NPV Lab 4: QOS Lab Lab 5a: Trace Tools Lab 5b: Trace Tools © 2008 Cisco Systems, Inc. All rights reserved 1 of 52 Lab Topology Pods 1-4 © 2008 Cisco Systems, Inc. All rights reserved 2 of 52 Pods 5-8 IP address assignments © 2008 Cisco Systems, Inc. All rights reserved 3 of 52 Password: Terminal server Login password: labops. Enable password: nuovanuova Nexus 5000: admin/nbv12345 Windows Server: administrator/nuovanuova Fabric Manager: admin/password © 2008 Cisco Systems, Inc. All rights reserved 4 of 52 Fabric Manager – Switch Mode View LUN Mapping FC 1/17 target has 11 g lun number 1 for server 1 FC 1/18 target has 12 g lun number 1 for server 2 FC 1/19 target has 13 g lun number 1 for server 3 FC 1/20 target has 14 g lun number 1 for server 4 FC 1/21 target has 15 g lun number 1 for server 5 FC 1/22 target has 16 g lun number 1 for server 6 FC 1/23 target has 17 g lun number 1 for server 7 FC 1/8 target has luns for server 8 Students will use Remote Desktop to access the Servers © 2008 Cisco Systems, Inc. All rights reserved 5 of 52 Student Lab Student has PC with one embedded Gigabit NIC and one 2 port CNA Nexus 5020 Switch Cat 6500 Chassis (shared) MDS 9134 (shared) 1 LUN of Storage (Pod 8 will have more) Pod Layout (Pod 3) JBOD for Pod 8 FC 1/8 & 1/16 HP array Storage for Pods 1-7 VSAN 13 2/3 1/3 CNA port 2 CNA port 1 Server © 2008 Cisco Systems, Inc. All rights reserved 6 of 52 Cat6500 © 2008 Cisco Systems, Inc. All rights reserved 7 of 52 Lab 1: Analyzing FCoE Packet Traces Activity Objective In this exercise, you will analyze a canned FCoE trace using Wireshark. After completing this exercise, you will be able to meet these objectives: Use Wireshark to identify the components of an FCoE frame Activity Procedure Connect to the server in your POD using Remote Desktop with username/password of administrator/nuovanuova. Complete these steps: Step 1 Launch the Wireshark application. Step 2 Open a canned FCoE traffic buffer. The filename is fcoe-t11.cap. © 2008 Cisco Systems, Inc. All rights reserved 8 of 52 Step 3 Review an FCoE frame. © 2008 Cisco Systems, Inc. All rights reserved 9 of 52 Step 4 Find the Ethertype of the FCoE frame. © 2008 Cisco Systems, Inc. All rights reserved 10 of 52 Step 5 Find the start of frame of the FCoE frame. Step 6 Find the CRC of the FCoE frame. © 2008 Cisco Systems, Inc. All rights reserved 11 of 52 Step 7 Find the end of frame of the FCoE frame. © 2008 Cisco Systems, Inc. All rights reserved 12 of 52 Lab 2: Configuring FCoE in Switch Mode Activity Objective In this exercise you will configure basic connectivity to the switch, 802.1q trunking, LACP Port Channels, Fibre Channel Port Channels, and FCoE connectivity. Note: The exercises in the lab were performed on POD 1. Please use the correct switches, VSANs, VLANs, IP addresses, storage ports, and host associated with your assigned POD. Activity Procedure For this first part of the lab you will need to Telnet into the Terminal Server and access the console of the N5K, as remote access through the management port has not been setup. Step 1. Telnet to 128.107.65.194, sign on with a password of labops Issue the show host command: Nuova_TermServer>show host [snip] Host Address(es) tm1 tm2 tm3 tm4 tm5 tm6 tm7 tm9 tm8 Port 2033 2034 2035 2036 2037 2038 2039 2044 2040 Flags Age Type IP IP IP IP IP IP IP IP IP 1.1.1.1 1.1.1.1 1.1.1.1 1.1.1.1 1.1.1.1 1.1.1.1 1.1.1.1 1.1.1.1 1.1.1.1 (perm, OK) 21 (perm, OK) 21 (perm, OK) 21 (perm, OK) 21 (perm, OK) 21 (perm, OK) 21 (perm, OK) 21 (perm, OK) 21 (perm, OK) 21 © 2008 Cisco Systems, Inc. All rights reserved 13 of 52 tm6500 mds 2042 2047 (perm, OK) 21 (perm, OK) 21 IP IP 1.1.1.1 1.1.1.1 Console in to the 5020 for your pod, for example, POD 1 would be TM1 Nuova_TermServer>tm1 Translating "tm1" Trying tm1 (128.107.65.194, 2033)... % Connection refused by remote host Deleting login session If you see the above error message you will need to get enable access to the terminal server and clear the line as shown below. The enable password is nuovanuova. If you do not see the error message above you can proceed to step 2 Nuova_TermServer>ena Password: Nuova_TermServer#clear line 33 [confirm] tm1 Translating "tm1" Trying tm1 (128.107.65.194, 2033)... % Connection refused by remote host Deleting login session If you see the above error message you will need to get enable access to the terminal server and clear the line as shown below. The enable password is nuovanuova. If you do not see the error message above you can proceed to step 2 Nuova_TermServer>ena Password: Nuova_TermServer#clear line 33 [confirm] ff.ff.fd 0xffff SW_ILS HLO 0x510 © 2008 Cisco Systems, Inc. All rights reserved 50 of 52 2008-08-14 05:12:09.134230 00:0d:ec:6d:90:40 -> aa:bb:cc:dd:01:04 6 0 ff.ff.fd -> ff.ff.fd 0x43b FC Link Ctl, ACK1 2008-08-14 05:12:09.383471 00:0d:ec:6d:90:40 -> 0e:fc:00:ff:ff:fd 4 0 ff.ff.fd -> ff.ff.fd 0xffff SW_ILS HLO 2008-08-14 05:12:09.384203 00:0d:ec:6d:90:40 -> aa:bb:cc:dd:01:04 4 0 ff.ff.fd -> ff.ff.fd 0xd6ec FC Link Ctl, ACK1 2008-08-14 05:12:09.653732 00:0d:ec:6d:90:63 -> 01:80:c2:00:00:00 5 0 00:0d:ec:6d:90:63 -> 01:80:c2:00:00:00 0x0 0x0 STP RST. Root = 4096/00:11:bc:52:20:d3 Cost = 1 Port = 0x8081 2008-08-14 05:12:09.762873 00:1e:be:b0:45:68 -> 01:00:0c:cc:cc:cd 5 0 00:1e:be:b0:45:68 -> 01:00:0c:cc:cc:cd 0x0 0x0 STP RST. Root = 4096/00:11:bc:52:20:d3 Cost = 0 Port = 0x8681 [snip] 2008-08-14 05:12:13.625256 00:c0:dd:0a:a4:d9 -> 0e:fc:00:ff:ff:fe 6 0 00.00.00 -> ff.ff.fe FC ELS FLOGI 2008-08-14 05:12:13.645838 00:0d:ec:6d:90:40 -> 00:c0:dd:0a:a4:d9 6 0 ff.ff.fe -> 2e.00.01 FC ELS ACC (FLOGI) 2008-08-14 05:12:13.646026 00:0d:ec:6d:90:40 -> aa:bb:cc:dd:01:04 6 0 2e.00.01 -> ff.ff.fc FC ELS PLOGI 2008-08-14 05:12:13.646116 00:0d:ec:6d:90:40 -> 0e:fc:00:2e:00:01 6 0 ff.ff.fc -> 2e.00.01 FC ELS ACC (PLOGI) 2008-08-14 05:12:13.646028 00:0d:ec:6d:90:40 -> aa:bb:cc:dd:01:04 6 0 2e.00.01 -> ff.ff.fd FC ELS SCR 2008-08-14 05:12:13.646395 00:0d:ec:6d:90:40 -> 0e:fc:00:2e:00:01 6 0 ff.ff.fd -> 2e.00.01 FC ELS ACC (SCR) 2008-08-14 05:12:13.646985 00:0d:ec:6d:90:40 -> 0e:fc:00:ff:fc:08 6 0 ff.fc.2e -> ff.fc.08 0xffff SW_ILS SW_RSCN [snip] 0x510 0x156c 0x156c 0x5 0xffff 0x5 0x513 0x6 0xffff 0x6 0x514 0x7 0xffff 0x7 0x515 0x516 © 2008 Cisco Systems, Inc. All rights reserved 51 of 52 153 packets captured © 2008 Cisco Systems, Inc. All rights reserved 52 of 52
Fly UP