Components For Automotive Applications REV-072015.

  • Published on
    24-Dec-2015

  • View
    215

  • Download
    0

Embed Size (px)

Transcript

<ul><li> Slide 1 </li> <li> Components For Automotive Applications REV-072015 </li> <li> Slide 2 </li> <li> AUTOMOTIVE GRADE CAPACITORS TS-16949 certified component production sites AEC-Q200 qualified products PPAP support Unique Part Numbers: YF part number suffix AEC-Q200 Tests Description: High Temperature Exposure (Storage) Temperature Cycling Moisture Resistance Biased Humidity Operational Life Physical Dimension Resistance to Solvents Mechanical Shock Vibration Resistance to Soldering Heat Thermal Shock ESD Solderability Electrical Characterization Flammability Board Flex Terminal Strength (SMD) Surge Voltage Source controlled to TS-16949 certified production sites Specific production lines with focus upon support for automotive equipment applications Use of YF suffix components provides added value, by assuring best fit component is selected for use in end application, preventing premature wear-out or early end-of-life of component (and system). Review of application for correct component fit, can prevent costly repairs (or rework) due to usage of improper component Automotive Grade Components For automotive equipment Page 2 Components For Automotive Applications </li> <li> Slide 3 </li> <li> AUTOMOTIVE GRADE COMPONENTS Page 3 Components For Automotive Applications Aluminum Electrolytic Capacitors SMT Radial LDD Liquid Construction &amp; Hybrid Construction Aluminum Electrolytic Capacitors SMT Radial LDD Liquid Construction &amp; Hybrid Construction MLCC Ceramic Capacitors SMT NPO &amp; X7R 0.5pF 1uF 10V 630V 0402 1210 Sizes MLCC Ceramic Capacitors SMT NPO &amp; X7R 0.5pF 1uF 10V 630V 0402 1210 Sizes Ferrite Chip Beads &amp; Common Mode Chokes SMT EMI Suppression Std &amp; High Current Ratings Ferrite Chip Beads &amp; Common Mode Chokes SMT EMI Suppression Std &amp; High Current Ratings Thick Film Thin Film Resistors &amp; Arrays SMT Sulfur Resistant Construction Low Noise, Precision TCR &amp; Tolerances Thick Film Thin Film Resistors &amp; Arrays SMT Sulfur Resistant Construction Low Noise, Precision TCR &amp; Tolerances Molded Case Power Inductors SMT High Current, Vibration Resistant Construction Molded Case Power Inductors SMT High Current, Vibration Resistant Construction See all Auto Grade Products: www.niccomp.com/autowww.niccomp.com/auto </li> <li> Slide 4 </li> <li> AUTOMOTIVE GRADE Aluminum Electrolytic Capacitors Components For Automotive Applications Page 4 28 Product Series Liquid &amp; Hybrid Construction SMT &amp; Radial LDD +105C +125C +130C +135C Lifetime ratings: up to 10,000 hrs Low ESR Z; down to 0.014 High RCR; up to 4340mArms High VDC ratings; up to 450VDC 28 Product Series Liquid &amp; Hybrid Construction SMT &amp; Radial LDD +105C +125C +130C +135C Lifetime ratings: up to 10,000 hrs Low ESR Z; down to 0.014 High RCR; up to 4340mArms High VDC ratings; up to 450VDC </li> <li> Slide 5 </li> <li> Temperature Rating Load Life Rating NIC Series (Type) Capacitance Value Range Voltage Ratings -40 ~ +130C -25C ~ +130C 4000 Hrs 2000 Hrs NRE-WY (Extended Temperature &amp; High VDC Rating) 1.0 ~ 4,700F 10 ~ 100VDC 200 ~ 400VDC -40 ~ +105C -25 ~ +105C 2000 Hrs 1000 Hrs NRE-HW ( High Voltage ) 1.0 ~ 330F160 ~ 450VDC -40 ~ +105C 10,000 Hrs 9,000 Hrs 8,000 Hrs 7,000 Hrs 6,000 Hrs NRZJ (Low ESR/Z &amp; Long Life) 8.2 ~ 8,200F6.3 ~ 100VDC -55~ +105C 7000 Hrs 5000 Hrs 4000 Hrs 3000 Hrs 2000 Hrs NRSZC (Low ESR/Z) 47 ~ 5,000F6.3 - 35VDC -55~ +105C 3000 Hrs 2000 Hrs 1000 Hrs NRSY (Low ESR/Z) 2.2 ~ 15,000F6.3 - 50VDC -55~ +105C 2000 Hrs 1000 Hrs NRWS (General Purpose) 2.2 ~ 15,000F6.3 - 100VDC AUTOMOTIVE GRADE Aluminum Electrolytic Capacitors / Radial Leaded Liquid Construction Features High CV in Low Cost Components For Automotive Applications Page 5 </li> <li> Slide 6 </li> <li> AUTOMOTIVE GRADE Aluminum Electrolytic Capacitors / Surface Mount Temperature Rating Load Life Rating NIC Series (Type) Capacitance Value Range Voltage Ratings -40C ~ +125C 4000 Hrs NATU ( Extended Temp. / Long Life ) 100 ~ 330F25V &amp; 35VDC -40C ~ +125C 3000 Hrs 2000 Hrs NATK ( Extended Temp. / Low ESR ) 100 ~ 3900F16 ~ 35VDC -40C ~ +125C 2000 Hrs 1000 Hrs NATT ( Extended Temp, ) 2.2 ~ 4,700F16 ~ 100VDC -55C ~ +105C 5000 Hrs 2000 Hrs NAZT ( Low ESR ) 4.7 ~ 12,000F6.3 ~ 100VDC -40C ~ +105C 3000 Hrs NAZU ( +260C Reflow) 10 ~ 330F6.3V ~ 50VDC -40C ~ +105C 5000 Hrs NAWU ( High VDC / Long Life ) 1.0 ~ 220F6.3V ~ 400VDC Liquid Construction Features High CV in Low Cost Page 6 Components For Automotive Applications Most Popular </li> <li> Slide 7 </li> <li> AUTOMOTIVE GRADE Aluminum Electrolytic Capacitors / Surface Mount Temperature Rating Load Life Rating NIC Series (Type) Capacitance Value Range Voltage Ratings -55C ~ +105C 2000 Hrs 1000 Hrs NACZ ( Low ESR / Wide Range ) 4.7 ~ 6800F6.3V ~ 50VDC -55C ~ +105C 2000 Hrs 1000 Hrs NACY ( Low ESR / Higher VDC) 2.2 ~ 6800F6.3V ~ 100VDC -55C ~ +105C 1000 Hrs NACX ( Low ESR / Reduced Size ) 1.0 ~ 150F6.3V ~ 63VDC -40C ~ +105C 2000 Hrs 1000 Hrs NACV ( High VDC ) 2.2 ~ 82F160V ~ 400VDC -40C ~ +105C 2000 Hrs NACH ( Low Profile 6.3mm H ) 0.1 ~ 220F4V ~ 50VDC -55C ~ +105C -40C ~ +105C (100V) 2000 Hrs 1000 Hrs NACEW ( Standard / Wide Range) 1.0 ~ 12,000F6.3 ~ 100VDC Liquid Construction Features High CV in Low Cost Page 7 Components For Automotive Applications </li> <li> Slide 8 </li> <li> AUTOMOTIVE GRADE CAPACITORS Aluminum Electrolytic Capacitors / Surface Mount Temperature Rating Load Life Rating NIC Series (Type) Capacitance Value Range Voltage Ratings -55C ~ +135C 2000 Hrs 1000 Hrs NSPE-Y ( Extended Temp. ) 10~ 330F25 ~ 63VDC -55C ~ +125C 3000 Hrs 2500 Hrs 2000 Hrs 1500 Hrs NSPE-T / NSPE-TZ ( Higher VDC &amp; Lower ESR ) 10~ 30F16 ~ 125VDC -55C ~ +125C 4000 Hrs NSPE-Z ( Extended Temp, Reduced Sizes ) 10~ 330F25 ~ 63VDC -55C ~ +125C 2000 Hrs NSPE-U ( Extended Temp. ) 22~ 560F6.3 ~ 16VDC -55C ~ +105C 10,000 Hrs NSPE-A ( Reduced Sizes ) 10~ 330F25 ~ 80VDC -55C ~ +105C 10,000 Hrs 7000 Hrs 5000 Hrs 3000 Hrs 2000 Hrs NSPE-H / NSPE-HZ ( Higher VDC &amp; Lower ESR ) 6.8~ 560F16 ~ 125VDC -55C ~ +105C 5000 Hrs 3000 Hrs NSPE-S ( Standard ) 10~ 1000F6.3 ~ 16VDC Hybrid Construction - Features Ultra Low ESR, High RCR &amp; Superior Low Temperature Performance Page 8 Components For Automotive Applications </li> <li> Slide 9 </li> <li> AUTOMOTIVE GRADE COMPONENTS Page 9 Components For Automotive Applications </li> <li> Slide 10 </li> <li> Competitor Cross Reference NMC-A Series Automotive Grade MLCCs AEC-Q200 qualified components from TS-16949 certified production site; QYF part number suffix Produced and tested on MLCC production lines dedicated to automotive component manufacturing. Quality initiatives include tightened process controls (casting, printing, and dicing) for improved margin control, and higher level test and inspection, to assure high quality components for automotive applications. Ultra-stable NPO and high capacitance X7R temperature coefficients (TCCs) meets AEC-Q200 Grade 1 requirements. Extended voltage ratings, from 10VDC to 630VDC, are ideally suited for use in higher voltage applications, such as ballasts for HID lighting. Automotive Electronics Applications: Cruise control Display &amp; dash board electronics Entertainment Heating and AC controls HID Lighting ballast In-vehicle Infotainment systems (IVI) Navigation - GPS - Compass Power windows and door locks Proximity sensors Remote keyless entry systems (RKE) Seating controls Telematics Wireless communications Automotive Electronics Applications: Cruise control Display &amp; dash board electronics Entertainment Heating and AC controls HID Lighting ballast In-vehicle Infotainment systems (IVI) Navigation - GPS - Compass Power windows and door locks Proximity sensors Remote keyless entry systems (RKE) Seating controls Telematics Wireless communications Temperature CoefficientNPOX7R Capacitance Range0.5pF ~ 0.01uF100pF ~ 1uF Capacitance Tolerance 0.05pF (A), 0.10pF (B) 0.25pF (C), 0.5pF (D) &amp; 5% (J) 10% (K) 20% (M) Operating Temp-55C ~ +125C TC (C)0 30ppm/C15% Rated Voltages 10V, 16V, 25V, 50V, 100V, 200V, 250V, 500V &amp; 630V CASE SIZES: 0402, 0603, 0805, 1206 &amp; 1210 CompetitorSeries AVXxxxxxCxxxx4xxA (4 = Automotive) EPCOS - TDKCGAxxx_ B, C, D, E, M, KEMETCxxxxC/F/S/X/Yxxxxxx AUTO MURATAGCM, GCJ, GCG, GC3 TAIYO YUDENEMR, HMK, LMR, TMR, UMR Automotive Grade - Ceramic Capacitors MLCCs Page 10 Components For Automotive Applications </li> <li> Slide 11 </li> <li> NMC-A Series Automotive Grade MLCCs Automotive Grade - Ceramic Capacitors MLCCs Page 11 Components For Automotive Applications Packaging Codes: C = 7 paper tape (Std 0402 ~ 0805) D = 13 paper tape (Option) E = 7 embossed plastic tape (Std 1206) F = 13 embossed plastic tape (Option) Packaging Codes: C = 7 paper tape (Std 0402 ~ 0805) D = 13 paper tape (Option) E = 7 embossed plastic tape (Std 1206) F = 13 embossed plastic tape (Option) NMC-A Series PN: NMC-A __________3QYF 3QY = Automotive production lines at TS-16949 site (Taiwan) and AEC-Q200 qualification NMC-A Series PN: NMC-A __________3QYF 3QY = Automotive production lines at TS-16949 site (Taiwan) and AEC-Q200 qualification </li> <li> Slide 12 </li> <li> TS-16949 certified site AEC-Q200 qualified General Impedance @ 100MHz 15 ~ 2000 Sharp Impedance @ 100MHz 10 ~ 2700 Current Ratings to 2.2A 0603, 0805, 1206 Case Sizes EMI/RFI Suppression to 1 GHz Operating Temp:-55C To +125C NCB Series NCBY Series Automotive Grade Ferrite Beads Standard Current NCBY Series Page 12 Components For Automotive Applications </li> <li> Slide 13 </li> <li> TS-16949 certified site AEC-Q200 qualified High Impedance @ 100MHz 15 ~ 1000 Current Ratings to 6.0A 0603, 0805, 1206 &amp; 1812 Case Sizes EMI/RFI Suppression to 1 GHz Operating Temp:-55C To +125C NCB-H Series NCB-HY Series Automotive Grade Ferrite Beads High Current NCB-HY Series Page 13 Components For Automotive Applications </li> <li> Slide 14 </li> <li> NPIS_LS Series NPIS_LP Series NPIM Series High Current Metal Composite Inductors NPIM_A Series Expanded Application Focus Low profile DC - DC converter circuits Highest Frequency SMPS Buck LED, Display Drivers Data Communication Power PoL Regulation Micro-processor Power Gap Free Core Terminals Copper Wire Components For Automotive Applications +150C Isat to 42A 3.0mm H +150C Isat to 42A 3.0mm H Cross &amp; Replace Vishay IHLP Series Coilcraft MVR, MLC Series Bourns SRP Series Page 14 </li> <li> Slide 15 </li> <li> NCCA Series Automotive Grade Common Mode Chokes NIC common mode chokes reduce the noise while maintaining the integrity of the signal in high speed data rate applications. With USB integration into automotive applications, the NCCA series has been introduced for high reliability complying to AECQ200. These common mode chokes are ideal for use in high speed digital equipment requiring higher reliability and compliance to AECQ200, such as displays, mass storage and USB hubs. Applications: Automotive Systems High Speed Data Lines Monitors &amp; Display Solid State Storage USB Port Hubs Entertainment In-vehicle Infotainment (IVI) Telematics Applications: Automotive Systems High Speed Data Lines Monitors &amp; Display Solid State Storage USB Port Hubs Entertainment In-vehicle Infotainment (IVI) Telematics CASE SIZES: 0805 &amp; 1206 Automotive Grade - Common Mode Chokes Components For Automotive Applications Upgrade COTS grade Automotive grade Characteristics - Features: High Reliability Complied to AECQ200 High Common Mode Impedance @ High Frequency Suitable For High Speed Digital Equipment (UCB/IEEE) Shielded Providing Excellent Noise Suppression Wide Temp. Range : -40C +125C Wide Impedance Range : 67 2,700 25% High Withstanding Voltage: 125VDC for 30 seconds Low profile miniature case sizes: 0805 &amp; 1206 Links : www.niccomp.com/emi www.niccomp.com/series/NCCA Page 15 </li> <li> Slide 16 </li> <li> Thick Film Chip Resistors 01005 2512 Standard 1% &amp; 5% 1/32W 1W NRC 0402 2512 Automotive 1% &amp; 5% 1/16W 1W NRC-A 0201 2512 Automotive 1% &amp; 5% 1/20W 1W NRC-AS 0402 2512 Severe Applications 1/16W 1W NRC-S NRC series: General purpose, low cost in wide range of case sizes E24 values (5%) &amp; E96 values (1%), 15V ~ 250V NRC-A series: AEC-Q200 Qualified for use in for automotive equipment applications; E24 values (5%) &amp; E96 values (1%), 50V ~ 250V NRC-AS series: Sulfur-resistant construction for use in automotive, industrial, power and high reliability applications with harsher environmental conditions ; E24 values (5%) &amp; E96 values (1%), 25V ~ 250V NRC-S series: Highest grade protection (Au coating) to protect against sulfur, for use in severe environmental conditions, or for mission critical applications; E24 (5%) &amp; E96 values (1%), 50V ~ 200V SULFUR RESISTANCE H 2 S / 3PPM / +40C 90% RH / 1000 HOURS SULFUR RESISTANCE H 2 S / 3PPM / +40C 90% RH / 1000 HOURS SULFUR RESISTANCE H 2 S / 1000PPM / +50C 91~93% RH / 1000 HOURS SULFUR RESISTANCE H 2 S / 1000PPM / +50C 91~93% RH / 1000 HOURS SULFUR RESISTANCE H 2 S / 5000PPM 1000 HOURS SULFUR RESISTANCE H 2 S / 5000PPM 1000 HOURS Better Best Good [ Option ] [ Standard ] NRC Series Family of Thick Film Chip Resistors Page 16 Components For Automotive Applications Sulfur corrosion of silver (Ag) conductors when used in sulfurous environments </li> <li> Slide 17 </li> <li> NRC-A Series Automotive Grade Thick Film Chip Resistors FEATURES: AEC-Q200 qualified / TS-16949 Certified production site For use in high reliability requirements of automotive applications Low profile flat chip thick film construction Resistance values 1 Ohm to 10 Meg-Ohm in E-24, E-96 values Resistance tolerances of 1% and 5%. Temp range of -55C to +155C with derated above +70C. TCRs of 100ppm/C to +400/-200ppm/C. Zero ohm jumper versions in all case sizes; current ratings covering 1.0A to 4.5A Sulfur-resistance testing requirements (H2S 3PPM, 40C, RH 90%, 1000 hours) Applications: Automotive Harsh Environments High Reliability Mission Critical PNCase Size Power Rating Voltage Rating NRCA0404020.063W50V NRCA0606030.10W75V NRCA1008050.125W150V NRCA1212060.25W200V NRCA2512100.50W200V NRCA5020100.50W200V NRCA10025121.0W250V Lowest Cost in Auto Grade Page 17 Components For Automotive Applications Thick Film Chip Resistors </li> <li> Slide 18 </li> <li> NTR-A Series Automotive Grade Thin Film Chip Resistors AEC-Q200 Thin Film Chip Resistors Testing: High Temperature Exposure Temperature Cycling Moisture Resistance Biased Humidity Operational Life External Visual Physical Dimension Resistance to Solvents Mechanical Shock Vibration Resistance to Soldering Heat Thermal Shock ESD Solderability Electrical Characterization Flammability Board Flex Terminal Strength Flammability Features: AEC-Q200 qualified / TS-16494 certified production site Stability over temperature, low noise and precise tolerances of thin film construction Small low profile flat chip packages EIA 0402, 0603, 0805, 1206, 1210, 2010 &amp; 2512 Power ratings cover 0.063 watt ~ 0.50 watt. Optional higher power ratings in 0603, 0805, 1206, 1210 and 2010 sizes Temp range o...</li></ul>

Recommended

View more >