Crypto Control URC-601

  • Published on
    28-Dec-2015

  • View
    617

  • Download
    1

Embed Size (px)

DESCRIPTION

Crypto Control URC-601

Transcript

<ul><li><p>Universal Remote Control for TV/ DVB-T &amp; 4 more devices </p><p>User Manual V1.0 </p><p>URC-601</p></li><li><p>URC-601 User Manual/ </p><p> 1 </p><p> Contents 1. INTRODUCTION ................................................................................................................................................ 2 </p><p>1.1 REMOTE CONTROL KEY GUIDE......................................................................................................................... 2 2. PROGRAMMING TO CONTROL TV, DVB-T &amp; OTHER DEVICES......................................................... 3 </p><p>2.1 PROGRAMMING CONTROL FOR TV DEVICES..................................................................................................... 3 2.1.1 Code Input programming......................................................................................................................... 3 2.1.2 Manual code search programming .......................................................................................................... 4 2.1.3 Automatic code search programming ...................................................................................................... 5 2.1.4 Brand code search programming............................................................................................................. 6 2.1.5 Flash code search programming ............................................................................................................. 7 </p><p>2.2 PROGRAMMING CONTROL FOR DVB-T DEVICES.............................................................................................. 8 2.2.1 Programming CRYPTO DVB-T ............................................................................................................... 8 2.2.2 Programming other DVB-T...................................................................................................................... 8 </p><p>2.3 PROGRAMMING OTHER DEVICES ....................................................................................................................... 9 3. LEARN FUNCTION OPERATION GUIDE..................................................................................................... 9 4 MACRO KEYS PROGRAMMING .................................................................................................................. 12 5 DEVICE CODE REMINDER............................................................................................................................ 13 6. TV VOLUME CONTROL ................................................................................................................................ 14 7.GENERAL INFORMATIONS ......................................................................................................................... 14 APPENDIX A ........................................................................................................................................................ 31 </p></li><li><p>URC-601 User Manual/ </p><p> 2 </p><p>1. INTRODUCTION </p><p>1.1 Remote Control key Guide </p></li><li><p>URC-601 User Manual/ </p><p> 3 </p><p>2. PROGRAMMING TO CONTROL TV, DVB-T &amp; OTHER DEVICES </p><p>2.1 Programming Control for TV Devices You can program the URC-601 remote, to control your TV using the following ways: </p><p>2.1.1 Code Input programming 1. Turn on your TV you want to program to work with the Crypto URC-601 remote control. Hold the remote in a straight line in front of your TV at a distance less than 1 meter. </p><p>2. Press and hold on the remote the device mode </p><p>button for about 3 seconds until the red light indicator lights up constantly. 3. Enter the four digit code that you found in the TV code list (Appendix C). </p><p>4. Press the POWER button If the TV turns off then the code is correct. If the TV remains on please follow the above steps 2-4 once more and enter the other four-digit code of your brand until you find the appropriate code that will make the device to be turned off. Attention: When a manufacturer has more than one code you must note the codes and try them one by one. Find which of the codes controls your TV and uses the most functions and use that one. </p><p> Note: If no key is pressed within 30 seconds </p><p>from the moment the red light of the button turns on, or another key other than number has </p><p>been pressed, the button will turn off and the programming process will be canceled. </p><p>Actions to verify correct programming Once you have programmed the remote with the correct code, check to see if most of the buttons are working according to the functions of your TV. Corrective Actions If any of the buttons do not work properly, you can program those buttons individually by using the learning function process described in chapter 3. </p></li><li><p>URC-601 User Manual/ </p><p> 4 </p><p>2.1.2 Manual code search programming 1. Turn on your TV you want to program to work with the Crypto URC-601 remote control. Hold the remote in a straight line in front of your TV at a distance less than 1 meter. 2. Press and hold down the remote device </p><p>mode button for about 3 seconds until the red light indicator lights up constantly. </p><p>3. Press the button or the button one step at a time until your TV turns off. Every time </p><p>you press the or buttons the </p><p> button will blink once 4. When the TV turns off it means that the remote have found the correct code for your TV. </p><p>5. Press the button to store the code. The </p><p> button light will turn off. Note: </p><p> At step 3 you can hold down or button constantly until the TV turns off. Attention: When the TV turns off you must release the button immediately so that the remote wont go to the next code. </p><p> For this feature you can press to search forward and to search backward the code libraries in the remote control.Given the size of the code libraries in the remote control, it will take several minutes to cycle through all the codes </p><p> Actions to verify correct programming Once you have stored on the remote the correct code, check to see if most of the buttons are working according to the functions of your TV. Corrective Actions If any of the buttons do not work properly, you can program those buttons individually by using the learning function process described in chapter 3. </p></li><li><p>URC-601 User Manual/ </p><p> 5 </p><p>2.1.3 Automatic code search programming 1. Turn on your TV you want to program to work with the Crypto URC-601 remote control. Hold the remote in a straight line in front of your TV at a distance less than 1 meter. 2. Press and hold down the remote device mode </p><p>button for about 3 seconds until the red light indicator lights up constantly. </p><p>3. Press the POWER button </p><p>4. The button will blink continuously in red meaning that the remote is searching for the code of your TV. </p><p>5. When the remote finds your TV code the TV will turn off. Attention: When the TV turns off you must immediately press the button to avoid the remote to go to the next code. </p><p>6. By pressing the button you have </p><p>already stored the code. The button light will turn off. </p><p> Note: This automatic search can be finished without finding an appropriate code for </p><p>your TV.In that case the button will stop blinking and your TV will remain on. Given the size of the code libraries in the remote control, it will take several minutes to cycle through all the codes Actions to verify correct programming Once you have stored on the remote the correct code, check to see if most of the buttons are working according to the functions of your TV. Corrective Actions If any of the buttons do not work properly, you can program those buttons individually by using the learning function process described in chapter 3. </p></li><li><p>URC-601 User Manual/ </p><p> 6 </p><p>2.1.4 Brand code search programming 1. Turn on your TV you want to program to work with the Crypto URC-601 remote control. Hold the remote in a straight line in front of your TV at a distance less than 1 meter. 2. Press and hold down at the same time </p><p>the button and the number from 0 to 9 that corresponds to the brand of the TV according to the brand search list in Appendix A </p><p>3. After 2 seconds the button will start blinking 4. When your TV turns off release both buttons so that the remote stores the code. Attention: When the TV turns off you must immediately release both buttons so to avoid the remote to go on the next code. </p><p> Note: This search can be finished without finding an appropriate code for your TV.In that </p><p>case the button will stop blinking and your TV will remain on. Actions to verify correct programming Once you have stored on the remote the correct code, check to see if most of the buttons are working according to the functions of your TV. Corrective Actions If any of the buttons do not work properly, you can program those buttons individually by using the learning function process described in chapter 3. </p></li><li><p>URC-601 User Manual/ </p><p> 7 </p><p>2.1.5 Flash code search programming This feature can only be used for TV, SAT and STB devices. 1. Turn on your TV you want to program to work with the Crypto URC-601 remote control. Hold the remote in a straight line in front of your TV at a distance less than 1 meter. </p><p>2. Press and hold the mute button. After 3 </p><p>seconds the button will start blink quickly </p><p>4. When the TV change channel release the mute </p><p>button. The button will start blink slower. </p><p>4. When the TV changes channel again press the </p><p>button to store the code Attention: When the TV changes channel for the second time, press the button immediately to avoid the remote to go to the next code. Note: This search can be finished without finding an </p><p>appropriate code for your TV.In that case the button will stop blinking and your TV will remain on. </p><p> Actions to verify correct programming Once you have stored on the remote the correct code, check to see if most of the buttons are working according to the functions of your TV. Corrective Actions If any of the buttons do not work properly, you can program those buttons individually by using the learning function process described in chapter 3. </p></li><li><p>URC-601 User Manual/ </p><p> 8 </p><p>2.2 Programming Control for DVB-T Devices You can program the URC-601 remote, to control your DVB-T in the following ways: </p><p>2.2.1 Programming CRYPTO DVB-T 1. Turn on your Crypto DVB-T you want to program to work with the URC-601 remote control. Hold the remote in a straight line in front of your device at a distance less than 1 meter. 2. Press and hold down the remote device mode button for about 3 seconds until the red light indicator lights up constantly. 3. Enter the four digit code that you found in the Crypto DVB-T code list (Appendix B). Note: If no key is pressed within 30 seconds from the </p><p>moment the red light of the button turns on, or another key other than number has been pressed, the button will turn off and the programming process will be canceled. </p><p> For all Crypto DVB-T's the button on the URC-601 remote control, will control the volume of your TV. </p><p>With this, you can control the sound of your TV without having to switch from DVB-T mode to TV mode. </p><p> Actions to verify correct programming Once you have programmed the remote with the correct code, using the above method, check to see if all the buttons are working according with the functions of your Crypto DVB-T. </p><p>2.2.2 Programming other DVB-T To program the remote, to control other DVB-T devices you must use the Learn function feature that is described in chapter 3. Note: If you want to program another DVB-T device , and you want to control the </p><p>sound of your TV by using the button like Cryptos DVB-T, use the LEARN method </p><p>and program the button using the remote control of your TV and learn the buttons that change the sound of your TV. With this, you can control the sound of your TV without having to switch from DVB-T mode to TV mode. </p></li><li><p>URC-601 User Manual/ </p><p> 9 </p><p>2.3 Programming other devices To program other devices such as DVD, STB, SAT, AUX (CD, HIFI) follow the methods of programming described in Chapter 2.1 Note: The complete list of all devices codes is available at our website www.cryptoelectronics.gr. </p><p>3. LEARN FUNCTION OPERATION GUIDE The learn function on the URC-601 remote control allows to program the keys one by one to learn to behave like the original remote control of your device. As an example, below is a method of programming a DVB-T using the learn function. Just follow the steps: 1. Turn on your DVB-T you want to program to work with the Crypto URC-601 remote control. 2.Press DVB-T button once </p><p>3. Press the learn button for about 3 seconds until the DVB-T button blink continuously in red color. 4. Press on the URC-601 the key that you want to program and learn. The red indication light of the DVB-T will light red constantly and stop blinking. 5. Bring the original remote opposite to the URC-601 and at a distance of 3 to 5 cm in such way so that the infrared windows are facing one another. 6. To continue press on the original remote that you have for the DVB-T the key that you want the URC-601 to learn. Keep it pressed until the red indication light on the DVB-T starts blinking again. Then you can release the button and its function will already be learned to the URC-601. Follow steps 4 6 again and again for each button you wish to learn on the remote </p></li><li><p>URC-601 User Manual/ </p><p> 10 </p><p> Note: If no key is pressed within 30 seconds the red </p><p>light indication will blink twice and turn off. During the learn process all buttons can be </p><p>programmed except from [LEARN], [] [MACRO] [ALL OFF], and device mode keys. </p><p> 6 If you have finished learning all the buttons you want and you need store all the learned key data </p><p>press the button. The red light indication on the DVB-T button will turn off. Attention: If after the completion of the learn process you reprogram this particular device by putting a different device code all stored data will be reset and replaced with th...</p></li></ul>